DUROARC 68A General Purpose

Product Code: MSE-DUR68A
Available
$49.50 (GST Excl.)

Options in this range:

Bulk pricing applies
4 +
$42.00/pk (GST Inc.)
4 +
$64.00/pk (GST Inc.)
4 +
$64.00/pk (GST Inc.)
4 +
$64.00/pk (GST Inc.)
Product info
DUROARC® 68 is a very unique and versatile mild steel electrode. The fast freezing flux offers the convenience of flat, vertical up and down and overhead without changing amperage setting. The electrode can be bent without flux breakage allowing the electrode to be positioned into difficult to reach spots without side arcing. Another feature of this electrode worth noting is that while classified as a 6013 type, it has tensile and yield strength’s well above what would normally be expected of this type (see mechanical properties below). SPECIFICATIONS Tensile Strength........................................600 MPa Yield Strength...........................................540 MPa Elongation................................................25 % Charpy V Notch @ -20°C.........................90J APPLICATION • Galvanised pipework • Poor fit up situations • Awkward welding positions where current adjustment is difficult WELDING PROCEDURES (POLARITY DC(-) OR (+) OR AC) Hold a short to medium arc length, lean electrode 45deg toward the direction of travel. Use either stringer or weave technique. In vertical positions, extremely heavy deposits of mitre contour can be made in one pass for butt and fillet welds using a triangular weaving motion. For second and subsequent passes, only a simple side to side weave is require with a slight pause in each corner to avoid undercutting. AWS A5.1 E6013

0 Reviews

0.0 Overall rating
5
0
4
0
3
0
2
0
1
0

There are no reviews for this product yet.

Top